0086-13635261646         sales@woodtech.cn
Home / News

News and Events

  • 18 2024-06
    Plywood Production Line Process
    The process of making plywood, from log to final product, has a notable influence on the environment, economy, and society. Plywood, a commonly used building material, is produced by bonding thin layers of wood veneers known as "plies" with adhesives to create a sturdy and durable panel. It is made
    +
  • 12 2024-06
    Plywood Production Line
    VENEER AND PLYWOOD PRODUCTION PROCESS1. Log grading: The quality and suitability of the logs for veneer-making are determined by examination and classification. 2. Log conditioning: Logs can be prepared for peeling by undergoing conditioning methods like soaking or steaming to increase their flexibi
    +
  • 07 2024-06
    How Is Plywood Constructed?
    Plywood is quite important since it may be used for many functional applications in structural, exterior, and interior projects. It can be applied to a variety of jobs, including as paneling and formwork. What is plywood made of exactly, and how is it made? In this article, we will address these inq
    +
  • 04 2024-06
    Veneer Drying
    Industrial veneer drying involves drying the wood veneer by removing water to a desired level. Utilize MuTian's smart solution for optimal efficiency.The smart veneer drying solutions for every scale productionDrying veneer is a crucial stage in the production process. Producing premium boards that
    +
  • 01 2024-06
    What Is Veneer Dryer Machine
    We will examine the process of drying veneer and the basic reasons for drying it. Upon finishing this brief article, you will understand the process of industrial veneer drying, its methods, and the advantages it offers in terms of productivity, cost-effectiveness, and quality for you and your manuf
    +
  • 08 2024-05
    What Is The Process of Veneering Wood?
    Although wood veneers have been around since antiquity, they were initially fashioned with saws. Sawing is no longer regarded as an efficient process because of the wide blade and design of the saw, which commonly chip wood and waste a lot of it during the process. Today, the procedure has changed d
    +
  • 06 2024-05
    Cutting Veneer in Many Ways: Rotary Peeling Or Slicing
    Veneer can be produced from raw wood in a number of ways, the most important of which is the method of cutting: rotary cutting or slicing.Rotary PeelingWhen a log is being rotary peeled, its whole length is placed in the middle of a lathe and continuously turned against a sharp knife. As with unroll
    +
  • 03 2024-05
    What Is Rotary Cut Veneer?
    Rotary CutRotary cut veneer is a type of wood veneer that is produced by the rotary peeling method. A log is placed on a lathe or rotary peeling machine during this process, and it spins as a knife or blade cuts it. The rotary cut derives its name from the way the blade rotates to continuously remov
    +
  • 01 2024-05
    What Is The Rotary Method of Making Veneer?
    The manufacturing process of wood veneerLogs are peeled into thin sheets, typically 0.6 to 6 millimeters thick, to create veneer. Professional jargon refers to this phase as "slicing." Before turning a tree trunk, often called a log, into veneer, there are a few stages that need to be completed.Choo
    +
  • 30 2024-04
    What Are 3 Methods of Cutting Veneers?
    The top layer of engineered flooring is made of real hardwood. Lamella, veneer, or wear layer are common names for the topmost layer. The species of the finished hardwood flooring is determined by the type of hardwood species chosen for the top layer.The top layer can be cut using three common techn
    +
  • Total 25 pages  Go to Page
  • Go