Views: 0 Author: Site Editor Publish Time: 2026-06-17 Origin: Site
Selection and Preparation of Unprocessed Poplar Wood
It begins with their choosing simple poplar logs with as few knots and cracks, up to October 2023 Logs are debarked, converted into standard lengths, conditioned to become softer and ease peeling resistance, which guarantees stable 3.6mm veneer products.
Spindleless Peeling Machine Working System
Today, spindleless log peeling machines, use in the production modern poplar veneers. Sawdust is efficient in supporting logs, fully distanced from bottom cuspid steel axes. With full-contact rotation (both side & end), remanufacturing input (sawing feed) is slicker, and lead content of finalized products are higher as well.
Stable Rotation with Teeth Roller Feeding
Teeth roller holds the impressed log surface and protects rotating speed even and corresponding swifter. This increases the grip at high speeds and prevents slipping when peeling, so that the veneer thickness is stable throughout production.
Nose Ring and Knife Coordination for Slice Cutting
The gap between the log and peeling knife is controlled by the nose bar. The system guarantees the exact cutting depth as needed for consistent 3.6mm veneer through systematic adjustments of pressure and position.
Real-Time Thickness Control and Automation
High end machines have servo or PLC based control systems to monitor and adjust various peeling parameters. This helps to keep them consistent in thickness despite the changes of log Diameter or density while operating continuous.
VENEER CONTINUOUS OUTPUT AND COLLECTION SYSTEM
When peeling starts, a continuous long veneer sheet is obtained from poplar log. The company automatically cuts, stacks and transfers these sheets to drying systems to minimize manual handling and improve production efficiency.
Fusion of Full Veneer Manufacturing Line
The peeling machine acts as the core of a full production line, linked with veneer dryers, sorting systems and plywood assembly lines. The integration facilitates stable output, a higher yield and industrial-scale production of 3.6mm veneer products.