0086-13635261646       sales@woodtech.cn
Share to:

Automatic Plywood Cold Press Machine

In the production of plywood, before the veneer assembly blank enters the hot press for hot pressing and gluing, it needs to be cold pressed in the pre-press for a period of time, so that the veneers of each layer are basically glued together to facilitate the assembly of the hot press. This process is called For pre-compression. 
Availability:
Quantity:

Automatic plywood cold press machine



In the production of plywood, before the veneer assembly blank enters the hot press for hot pressing and gluing, it needs to be cold pressed in the pre-press for a period of time, so that the veneers of each layer are basically glued together to facilitate the assembly of the hot press. This process is called For pre-compression. The slab pre-compression can prevent the veneer from misalignment during the moving process and cause defects such as core stacking or core separation; second, it can increase the fluidity of the glue to facilitate the formation of a good continuous glue film on the surface of the veneer, thereby avoid lack of glue, dry glue, etc., so automatic plywood cold press machine is beneficial to increase the output of plywood, and at the same time, it can shorten the hot pressing time, which is beneficial to increase the number of layers of the hot press, increase the output of the hot press, and reduce the production cost.



Product Specification


DESCRIPTION

UNIT

SPECIFICATION

Platen size

mm

1400*2700

Total pressure

T

400-500T

Cylinder work stroke

mm

800

Cylinder number

/

2

Whole frame height

mm

4340

Whole frame width

mm

3510

Frame steel thickness

mm

30*350

Control method

/

Semi auto hydraulic station