Eucalyptus is a commonly used timber species in the woodworking industry and is prized for its exotic, shimmering ripple effect in its texture. Can be used in furniture, flooring and panel manufacturing. The veneer peeling machine not only improves the quality and precision of veneer production, but also greatly improves the production efficiency and the automation of the entire machine.
What is a veneer machine?
Let’s first understand what a single board computer is. The wood is turned by a sharp blade and stripped in a continuous or semi-continuous rolling motion. Rotary cut veneer is mainly used for plywood. This is done by using a rotating saw blade to strip the wood from the log in a continuous and even manner. Once machines produce wooden veneers, they can be used for a variety of purposes, including furniture making, flooring and paneling.
Choosing the right eucalyptus logs
The first step in making veneer is choosing the right log. Make sure the logs should be straight, without any twists or knots, and consistent in diameter. It is important to choose logs that are defect-free and have a relatively low moisture content (around 30%). Logs with high moisture content may warp or split during the peeling process, resulting in uneven and unusable veneers.
How to use
Load logs into veneer machine
Start by checking the pre-veneer for any defects. If there is any, trim it off with a sharp knife or wood chisel. Start by loading the logs into the wood veneer. This can be done manually using a forklift or using an automated loading system. It is important to make sure the log is properly centered and aligned with the peeler head to ensure an even and consistent cut.
Rotational peeling
Our equipment uses hydraulic blades, which are easy to change during grinding. Once the logs are loaded into the lumber machine, the rotary cutting process begins. This machine uses a large circular saw blade to continuously and evenly peel logs. The thickness of the veneer depends on the saw blade settings and can be adjusted as needed.
Dry eucalyptus veneer
After peeling eucalyptus logs, the resulting veneer is still wet and needs to be dried before use. Before processing, the veneer should be dried to a moisture content of about 10-12%.
Complete the board
If necessary, sand the veneer surface to obtain a smooth, even texture. This can be done through a variety of methods, including staining and sealing. Sanding is important to ensure that the veneer is smooth and free of any rough spots or imperfections.
Main uses of veneer peeling machine
Fuzhou mutian's rotary cutting machine is mainly used for planing and cutting wooden boards with high production efficiency. The planed veneer has uniform thickness and beautiful texture. Suitable for decorative veneers in plywood, particleboard, blockboard furniture, construction, flooring and other industries.
The boards produced by our veneer peeling machines are of good quality, with accurate and uniform thickness and smooth surface. For more product information, click to contact us!
