Views: 568 Author: Site Editor Publish Time: 2024-02-28 Origin: Site
Due to its high level of automation and automatic pressure bar, the veneer peeling lathe does not require the user to manually change pressure while cutting. Its purpose is to peel and slice thin hardwood boards in order to create an even, smooth surface that may be used for flooring, furniture, and other purposes.
If you're not familiar with this equipment, ou may be questioning how to install a veneer peeling lathe. You will be guided through the required steps by this article.
●Step 1: Choose The Right Location
●Step 2: Assemble The Machine
●Step 3: Attach The Power Source
●Step 4: Examine Components
●Step5: Give The Device A Test
Prior to beginning the installation procedure, choose the best location for your veneer peeling lathe. Because this equipment is large and requires a lot of area to operate, be sure you have adequate space to store it and comfortably move around it.
To avoid mishaps, confirm that the location is level, level, and clear of obstacles. To avoid interfering with the machine's functioning, ensure that the environment is well-ventilated and clear of dust and debris.
Start putting the veneer peeling lathe together when you've decided on a suitable spot. The user manual should be carefully read for advice once all parts have been unpacked and placed on a level surface.
Make sure to inspect every part, such as the base, spindle, knives, rollers, and any extra parts that could be needed. A manufacturer's handbook or assistance from the manufacturer may be required to securely connect the pieces in the right order.
Ensure that your veneer peeling machine is connected to a suitable power source, typically requiring 220-240V three-phase power. After connecting the motor and air switch cords, wait for it to start.
Manually check the belt, chain, and motor for tightness. Check for stability, smooth functioning, and the lack of obstructions in the transmission system.
Examine each component for accuracy and stability.Evaluate guards for precision and strength.Check the responsiveness of the handwheels and buttons. After inspection, lubricate the machine's shaft with clean lubricating oil. Test the machine gradually.
Primary motor test: confirm that the spindle is functioning normally
Blade adapter functions normally in both forward and backward motor tests.
Test the clamping motor to make sure the shaft performs normally in terms of clamping and releasing quickly.
Ensure quick reciprocating action and no steps during the cutterhead motor test.
Verify the pressure gauge's speed and absence of steps during reciprocating movement by running the pressure controller motor test.
Verify that all of the links are securely buckled, the wire rope is undamaged, the motor and reduction motor are operating as intended, and the installation went successfully.
Be mindful: after a portion has been tested, shut it and go on to the next.
Once everything has been verified, it may be used in production.
To learn more about veneer peeling machines, get in touch with us right away. We are experts in manufacturing and selling machinery and equipment for plywood production lines. We are committed to offering you top-notch and passionate services.