Why Plywood Hot Press Machines Are Very Popular in the Philippines?Plywood manufacturing in the Philippines is fast expanding, bolstered by demand for construction, furniture-building, interior adornment and export as nicely. Numerous factories utilize plantation species obtained locally from falcat

What Does a 2 in 1 Veneer Peeling Machine DoThe so-called 2 in 1 veneer peeling machine integrates two processing functions into a single piece of equipment, such as the combination of log rounding and veneer peeling or spindle and spindleless peeling functions according to the design method of mach

Eucalyptus LogsEucaliptus is one of the wood species most commonly used for veneer peeling. It is a high-density, rapidly renewable and consistently available material from plantation forests. Due to its high uniformity and veneer smoothness as well as high recovery, when processed e.g. with a tende

Reduces Internal Wood StressThis process compresses and softens the wood fibers before peeling occurs. This decreases the internal tensions inside the log so that it separates more easily in the lathe veneer cut, avoiding many defects such as cracks and splits or tearing of fibers in production.Prod

Uneven Veneer ThicknessPeeling due to uneven thickness of the veneer is one of the most common faults. It is usually caused when the knife adjustment is not set properly, hydraulic pressure remains uneven, worn pressure rollers or poor log centering. Frequent calibration with knife position helps ke

The veneer quality begins even before the process of production which is with its raw material. Select straight logs with little knots, cracks or rot and be sure to condition or tenderize the bark before peeling. These logs digested by the peeler will discharge a slicker surface veneer while less kn

What Is Veneer Peeling Technology?Abstract Veneer peeling technology is a method to produce continuous sheets of thin wood veneer by turning round logs for plywood, LVL, furniture panels, and other engineered wood products. Recently, modern veneer peeling technology integrates precision mechanical s

Step 1: Preparation of the log and tenderizingFirst the appropriate logs are chosen, such as eucalyptus, poplar, pine or rubberwood. The process begins with a tenderizing step, where the logs are forced through steel rollers, compressing and softening the wood fibers before peeling. It minimizes int

Define Your Production RequirementsSome considerations include, what type of wood species do you work on, how thick to do you need the veneer so that it is still acceptable for sale (the peeler must be able to peel thinner layers), and what volume per hour do consider a good purchase. It allows you

Plantation Hardwood LogsYou can use tenderized spindleless veneer peelers for processing plantation hardwoods like eucalyptus, poplar, rubberwood and birch. They are often marketed for the plywood industry because they provide peeling and veneer quality stability while also facilitating access to la